Environmental Legislation for UK Manufacturers

UK manufacturers must hold the right permits, manage waste lawfully, report on packaging, energy and carbon, and register the chemicals they make or import. Several of these duties change between now and 2027. This guide sets out the main environmental laws that apply to manufacturing businesses in November 2026 and what to do about each.

Environmental permits: the Environmental Permitting Regulations 2016

Operating a regulated facility without the right permit is a criminal offence. The Environmental Permitting (England and Wales) Regulations 2016 (SI 2016/1154) came into force on 1 January 2017. They consolidated the 2010 Regulations into a single permitting regime for industrial and waste activities that could harm the environment or human health, and they extend to England and Wales only.

Regulation 12 requires an environmental permit for regulated facilities. The principal offences are operating a regulated facility without a permit, and causing or knowingly permitting a water discharge or groundwater activity without one. Permits can be bespoke, or issued under standard rules with set conditions, and some low-risk activities are exempt facilities that must be registered instead.

What manufacturers should do:

  • Check each process, discharge and waste operation on site against the regulated activities and exemptions.
  • Keep a current copy of every permit and a register of its conditions.
  • Apply for a variation before changing a permitted process, and notify the regulator of transfers of the permit.

Waste: your duty of care under the Environmental Protection Act 1990

Every manufacturer that produces waste has a legal duty of care for it. Section 34 of the Environmental Protection Act 1990 applies to anyone who imports, produces, carries, keeps, treats or disposes of controlled waste, or acts as a broker or dealer in it. Failing to comply is an offence that carries an unlimited fine on conviction.

The statutory Waste Duty of Care Code of Practice explains the steps expected. The duty runs down the whole disposal chain, so you may need to check more than the first business that takes your waste. In England the regulators are the Environment Agency and local authorities, and in Wales Natural Resources Wales and local authorities.

What manufacturers should do:

  • Check that every carrier and receiving site is authorised to take your waste, and keep the evidence.
  • Transfer a written description of the waste with each load so the next holder can handle it lawfully.
  • Store waste securely so that it cannot escape from your control.
  • Keep transfer records so you can show how each waste stream was handled.
Environmental legislation and regulatory compliance for UK manufacturers, highlighting emissions reduction, waste management and environmental sustainability
Environmental legislation

Packaging: producer responsibility and Plastic Packaging Tax

If you make, fill, import or supply packaging, two separate regimes may apply to you.

Extended producer responsibility (EPR). The Producer Responsibility Obligations (Packaging and Packaging Waste) Regulations 2024 (SI 2024/1332) largely came into force on 1 January 2025 and apply across England, Wales, Scotland and Northern Ireland. They make producers pay the full cost of collecting and recycling the packaging they place on the market, and they require detailed packaging data. An amending set of regulations took effect on 1 January 2026. From 2026, fees are modulated by recyclability, so packaging that scores badly on the Recyclability Assessment Methodology costs more. Whether you count as a large or small producer depends on your turnover and the tonnage of packaging you handle, so check the government’s EPR guidance.

Plastic Packaging Tax. Since 1 April 2022, finished plastic packaging components that contain less than 30% recycled plastic by weight have been taxable. The rate rose to £228.82 per tonne on 1 April 2026. You must register once you manufacture or import 10 tonnes or more in a rolling 12 months, even if no tax is due. From 1 April 2027, pre-consumer plastic waste, such as your own off cuts, will stop counting towards the 30% threshold, while qualifying chemically recycled plastic will be able to count under a mass balance approach.

Exporting to the EU. The EU Packaging and Packaging Waste Regulation applies from 12 August 2026 and adds sustainability and labelling requirements for packaging placed on the EU market.

What manufacturers should do:

  • Map the packaging you supply, who is legally the producer for each stream, and the tonnage by material.
  • Keep recycled-content evidence for every plastic component, including those above 30%.
  • Check now whether any packaging relies on pre-consumer recycled content that will not qualify from April 2027.

Carbon and energy: UK ETS, SECR and ESOS

Three separate regimes cover carbon and energy, and which ones apply depends on what you make and how large you are.

UK Emissions Trading Scheme. The UK ETS was set up by the Greenhouse Gas Emissions Trading Scheme Order 2020 and has operated since 1 January 2021. It covers energy-intensive industrial installations, the power sector, aviation and, from 1 July 2026, domestic maritime. An installation in scope needs a permit and must surrender enough allowances to cover its emissions by 30 April each year. Installations with emissions below 2,500 tonnes of CO2e a year may qualify for simplified ultra-small emitter status.

Streamlined Energy and Carbon Reporting (SECR). Under regulations that took effect for accounting periods starting on or after 1 April 2019, quoted companies and large unquoted companies and LLPs must report their UK energy use and greenhouse gas emissions in their annual report. A company is large if it meets at least two of three tests. For financial years beginning on or after 6 April 2025 the thresholds are turnover above £54 million, a balance sheet total above £27 million, and more than 250 employees. Check the government’s reporting guidelines and confirm your size status with your accountant.

Energy Savings Opportunity Scheme (ESOS). Large UK undertakings must carry out energy audits every four years under the Energy Savings Opportunity Scheme Regulations 2014. The qualification date for the next phase is 31 December 2026, and the compliance notification is due by 5 December 2027. Display Energy Certificates and Green Deal assessments will no longer be valid compliance routes, and government guidance for the phase is expected in early 2027. Organisations that were in scope last time must also file their second progress update by 5 December 2026.

What manufacturers should do:

  • Confirm whether any of your sites is a UK ETS installation and check your allowance position before 30 April.
  • Test your group against the SECR and ESOS size criteria, using figures as they stand on 31 December 2026 for ESOS.
  • Start collecting energy data by site now, because ESOS and SECR both depend on it.

Imports: the UK Carbon Border Adjustment Mechanism from 1 January 2027

If you import aluminium, cement, fertilisers, hydrogen, or iron and steel, a new carbon tax applies to those goods from 1 January 2027. The UK Carbon Border Adjustment Mechanism (CBAM) puts a carbon charge on specified imports so they face a price comparable to the one UK producers pay under the UK ETS. The charge is created by the Finance Act 2026, and HMRC laid the detailed rules as secondary legislation in July and September 2026.

You must register with HMRC if the value of CBAM goods you imported in the previous 12 months was £50,000 or more, or you expect it to be over £50,000 in the next 30 days. Registration is expected to open through the Government Gateway in late 2026. HMRC guidance stresses record keeping, and importers will need emissions data from their suppliers, using either default values or independently verified actual data. The government’s CBAM policy summary is the best starting point.

What manufacturers should do:

  • Check your bought-in materials and components against the CBAM commodity codes.
  • Total your imports of those goods over the last 12 months against the £50,000 threshold.
  • Ask overseas suppliers now what emissions data they can provide and whether it can be verified.

Chemicals: UK REACH deadlines extended to 2029–2031

GB manufacturers and importers of chemical substances must register them under UK REACH, independently of any EU REACH registration. In 2026 the government extended the transitional registration deadlines through the REACH (Amendment) (No. 2) Regulations 2026. The new submission deadlines are 27 October 2029, 27 October 2030 and 27 October 2031, replacing 27 October 2026, 2028 and 2030. Which date applies depends on the substance’s tonnage band and hazard profile.

The extra time is to allow the Alternative Transitional Registration Model (ATRm) to be finalised, and it does not remove your current duties. You still need to meet obligations such as safety data sheets and supply-chain communication. UK REACH applies in Great Britain only, and EU REACH continues to apply in Northern Ireland. The government’s consultation outcome sets out the options it considered.

What manufacturers should do:

  • List every substance you manufacture or import into Great Britain and its tonnage band.
  • Work out which registrations you hold, which you need, and who the lead registrant is.
  • Ask EU suppliers whether they will hold valid UK REACH registrations, or whether you must register yourself.

Need Advice on Environmental Legislation for your Business?

If you need a bespoke legal register detailing relevant environmental legislation for your business, please contact one of our team.

Leave a Reply

Your email address will not be published. Required fields are marked *